Product Details
RF modules, 100W power amplifiers, and 1G to 6G ultra-bandwidth amplifier modules are essential for advanced wireless communication systems. They power 5G/6G base stations, enabling high-speed, low-latency connectivity for smart cities and IoT. In satellite communication, they ensure long-range, high-power signal transmission. These modules are critical for radar systems in defense and aviation, providing precise detection and tracking. They also support wireless backhaul networks, autonomous vehicles, and industrial IoT applications. Additionally, they are used in broadcast systems, RF testing equipment, and emerging 6G networks, offering reliable, wideband performance for next-generation technologies. Their versatility makes them ideal for high-power, high-frequency communication across diverse industries.
DST-PA10006000M100W
Test Project | Unit | Notes | Remarks |
Frequency Band | MHz | 1000-6000 |
|
Operation Voltage | V | 24-28(+28V testing) | +28V testing |
Power Gain Range | dB | 48-54 | 50 dBm testing |
Power Gain Flatness | dB | <±2.0 | 50 dBm testing |
Output Power at 3dB compression | dBm | 50 |
|
O IP3 | dBm | >53 |
|
2rd, 3rd | dBm | <-10dBc |
|
Spurious Signals | dBc | 70dBc typ, 60dBc min. |
|
Input Connector VSWR |
| <1.5 |
|
Output Connector VSWR |
| - |
|
High and Low temperature test | Work temperature (℃) | ℃ | -40° -+60° |
|
Output Stability | dB | 2 | 50dBm testing |
Power Supply requirement |
| DC current ≤ 15A | 50 dBm testing |
Power Supply wire |
| 7W2 connector preferable (D-sub 9-pin acceptable) |
|
Enable Control |
| Yes |
|
Vibration Need |
| Sine 1-500Hz (5g) |
|
RF input connector |
| SMA-Female |
|
RF output connector |
| N-Female |
|
Outshell Size | mm | 200x100x25 |
|
Install Holes | mm | No preference |
|
Heatsink |
| Size TBD |
|
Interface PIN description |
I/O Interface(7W2) | 1. Enable (Active low) | Pulled-up @ 3.3V with 10kohm |
| 2. N.C |
|
| 3. N.C | GND |
| 4. N.C | GND |
| 5. Temperature Alarm | Tc=85-90(℃) out 5V, close PA..Tc Tc returns to 65 ℃ and opens PA |
| A1. VCC | +28V |
| A2. GND |
|
