Product Details
The Fiber Optic Repeater offers a seamless blend of user-friendliness and unparalleled performance, delivering an exceptional value proposition for cost-conscious mobile operators seeking a robust yet cost-effective solution.
The Fiber Optic Repeater is designed for mobile coverage extension in indoor and outdoor long-distance applications. It offers a unique combination of simplicity and high performance, making it an ideal choice for cost-conscious mobile operators seeking a reliable and cost-effective solution.
The Fiber Optic Repeater consists of a Master Unit (MU) and Remote Units (RU). The MU is designed to be easily mounted into a 19” rack at the BTS location while the RU can be installed up to 20 km away from the MU over a fiber link. RF signal is coupled from the BTS, therefore providing a stable input signal to the MU. Without the donor antenna, the problem of isolation is totally avoided. The Fiber Optic Repeater also has the Intelligent Mode embedded. Hence, the interference can be reduced continuously.
The Fiber Optic Repeater is able to support from one band to five bands. And one master unit can connect eight remote units simultaneously.
The solution of Fiber Optic Repeater is cost-effective for coverage extension without the need of implementing more BTS sites. It can be applied to much larger areas including large public building, hotels, parking lots, hyper markets, tourist spots, tunnels and rural areas.
Specs
Parameter | Master Unit |
Working Frequency | GSM900: UL: 885-915MHz, DL: 930-960MHz |
LTE800: UL: 832 ~ 862MHz, DL: 791 ~ 821MHz |
LTE2600: UL: 2500~2570MHz, DL: 2620 ~ 2690MHz |
Transmission Distance | ≤ 20km |
Max. Input Level | -10dBm |
Output Power | UL: 10dBm, DL: 0dBm |
Max. Gain | UL: 30dB, DL: 30dB |
Manual Gain Control (MGC) | 1~31dB @ step of 1dB |
Voltage Standing Wave Ratio (VSWR) | < 2.5 |
Noise Figure | < 5dB |
In-Band Ripple | 5dB P-P |
Spurious Emission | Within working band | ≤ -15dBm/30kHz |
Out of working band | 9kHz~1GHz: ≤ -36dBm/30kHz |
(Δf > 2.5MHz) | 1GHz~12.75GHz: ≤ -30dBm/30kHz |
Third-Order Inter-modulation | -40dBc/30kHz (measured under rated output power) |
System Delay | ≤ 5.0μ |
I/O Impedance | 50Ω |
RF Connector | N-Type (Female) |
Optical Connector | FC/APC |
Temperature Range | Operation: -25°C ~ +55°C / Storage: -30°C ~ +60°C |
Relative Humidity Range | ≤ 95% (non condensing) |
Power Supply (customization) | DC 9V, AC 220V/176V - 265V, 50Hz - 60Hz |
Power Consumption | 20W |
Casing Level | IP30 |
Dimensions | 373×228×72.8mm |
Weight | 9KG |
LED Alarm | Power LED | DC ON/OFF |
AGC LED | Alarm Red when ALC control over 10dB |
ISO LED | Alarm turns Red when ALC≥25dB, RF stop working |
Parameter | Remote Unit |
Working Frequency | GSM900: UL: 885-915MHz, DL: 930-960MHz |
LTE800: UL: 832 ~ 862MHz, DL: 791 ~ 821MHz |
LTE2600: UL: 2500~2570MHz, DL: 2620 ~ 2690MHz |
Transmission Distance | ≤ 20km |
Max. Input Level | -10dBm |
Output Power | UL: 0dBm, DL: 10dBm~20dBm (8pcs remote units can be connected simultaneously) |
Max. Gain | UL: 30dB, DL: 35dB~40dB (8pcs remote units can be connected simultaneously) |
Manual Gain Control (MGC) | 1~31dB @ step of 1dB |
Voltage Standing Wave Ratio (VSWR) | < 2.5 |
Noise Figure | < 5dB |
In-Band Ripple | 5dB P-P |
Spurious Emission | Within working band | ≤ -15dBm/30kHz |
Out of working band | 9kHz~1GHz: ≤ -36dBm/30kHz |
(Δf > 2.5MHz) | 1GHz~12.75GHz: ≤ -30dBm/30kHz |
Third-Order Inter-modulation | -40dBc/30kHz (measured under rated output power) |
System Delay | ≤ 5.0μ |
I/O Impedance | 50Ω |
RF Connector | N-Type (Female) |
Optical Connector | FC/APC |
Temperature Range | Operation: -25°C ~ +55°C / Storage: -30°C ~ +60°C |
Relative Humidity Range | ≤ 95% (non condensing) |
Power Supply (customization) | DC 9V, AC 220V/176V - 265V, 50Hz - 60Hz |
Power Consumption | 20W |
Casing Level | IP30 |
Dimensions | 373×228×72.8mm |
Weight | 9KG |
LED Alarm | Power LED | DC ON/OFF |
AGC LED | Alarm Red when ALC control over 10dB |
ISO LED | Alarm turns Red when ALC≥25dB, RF stop working |
