Testing
|
| Remark |
Operating Voltage | 28V | 28-32V |
Operating Frequency | 730-1030MHz | Bandwidth 300MHz |
Max Output Power | 45±0.5dBm |
|
Operating Current | 3.8A | @30W Typical |
Controllable output power* | 15~30W | ALC adjustable |
ALC power adjustable range* | ≥3dB | voltage controlled attenuation |
Gain | 45±1.0dB |
|
In-band ripple | 3dB | Peak-Peak |
Default Signal Input Power | 0dBm |
|
Max Allowable Singal Input Power | ≥+10dBm | Continuous 1min no damage |
Input VSWR | ≤1.50 | Add+28V, standard network output-10dBm |
Output VSWR | ≤1.50 | No power supply, standard network output -10dBm |
≤1.50 | Power-up, Bi-directional Coupler Test |
Temperature Testing | Operating Temperature | -10～+55℃ | Can Start by Low temperature, monitoring work normally |
Gain stability | ±1.5dB@-10℃～+55℃ |
|
Power stability | ±1.5dB@-10℃～+55℃ |
|
Power supply requirement | ≥4.5A @+30Vdc； |
|
Power supply interface | Feed through capacitor VCC+30V; Grounding: GND |
Control interface: 5pin XH-2.54mm | 1: TEMP_DET: Temperature detection AD voltage value 2: PA_FWD: Positive power detection AD voltage value 3: PA_REV: VSWR Alarm, high level alarm, low level cancellation; 4: PA_EN : Enable switch; high level 3V~5V on, low level <2V off; 5: PA_ADJ: NO |
RF Output connector | SMA-F |
Module Protection | Temperature Compensation, Over Temperature Protection, VSWR Protection |
LED module indicator lights | POWER: power indicator, RUN: power run indication, VSWR: standing wave warning indication |
Dimension | 140*71*21mm |
Net Weight | 390g |
Packing size | 210*108*38mm |
Weight with packing | 445g |
